ISO 2768
ISO 2768
(OP)
DOes anyone know if the USA has approved and adopted the ISO 2768 linear tolerances? IF so
Frank
Frank
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Contact USThanks. We have received your request and will respond promptly. Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting Guidelines |
|
Join your peers on the Internet's largest technical engineering professional community.
It's easy to join and it's free.
Here's Why Members Love Eng-Tips Forums:
Register now while it's still free!
Already a member? Close this window and log in.
RE: ISO 2768
RE: ISO 2768
2)do you use any other standards in your drawings?
thanks,
ddkb
RE: ISO 2768
Our title block references ISO2768 and our component supplies are familiar with the tolerance standard.
Drawing format is to our corporate standard, according to DIN practices in all but one case (did't like the angle dimensions rotating text orientation, so all text is horizontal.)
RE: ISO 2768
F
RE: ISO 2768
kokelj@gmail.com
RE: ISO 2768
"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
RE: ISO 2768
Please see the FAQ Where can I get ISO specifications from? (FAQ182-802). Also, see the post in Thread177-23759 by member TVP to understand why codes are not available for free.
Best regards,
Matthew Ian Loew
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.