Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hazardous Area Inspection Report

Status
Not open for further replies.
Ahr35181

Ahr35181

Electrical
Joined
Sep 8, 2003
Messages
80
Location
GB
I'd be interested to hear how other companies prioritise remedial work picked up during a periodic inspection of an hazardous area?

At present we use the same format as shown in BS7671 GN3:-

1...Requires urgent attention
2...Requires improvement
3...Requires further investigation

Thanks in advance,

Alan
 
Status
Not open for further replies.

Similar threads

PetkovStoyan
  • Locked
  • Question Question
Inspection of keyway in bore
Replies
13
Views
2K
geesaman.d
geesaman.d
CTengIS
  • Locked
  • Solved
Hole position inspection without CMM, primary datum simulation
Replies
1
Views
984
geesaman.d
geesaman.d
Bazinga
  • Locked
  • Question Question
Inspection Plugs on hot insulation
Replies
4
Views
507
0707
0707
ASIT859
  • Locked
  • Question Question
FARO Cam2 - Straight Slot Surface Datum A, Flat Surface Datum B Inspection?
Replies
0
Views
865
ASIT859
ASIT859
vjesh
  • Locked
  • Question Question
Inspection
Replies
2
Views
304
0707
0707

Part and Inventory Search

Sponsor

Back
Top