confusedadmin
Aerospace
Hi all,
Am having a heck of a time with Catia v5 performance on HP-UX.
HW model: 9000/785/B2600
Clock Frequency: 500 Mhz
1 processor
OS level: B.11.00
Total swap configured: 2484656
The kernel parameters seem to be set high enough and correctly, I've gone through and made several of the suggested changes from the document HP-UX Performance Hints found on the HP/Dassault web pages.
Granted the guys are running large assemblies with a lot of parts. However, they seem to run better on their unsupported PC's than on these beefed up HP's. What could be wrong? Any direction or guidance will be appreciated.
Am having a heck of a time with Catia v5 performance on HP-UX.
HW model: 9000/785/B2600
Clock Frequency: 500 Mhz
1 processor
OS level: B.11.00
Total swap configured: 2484656
The kernel parameters seem to be set high enough and correctly, I've gone through and made several of the suggested changes from the document HP-UX Performance Hints found on the HP/Dassault web pages.
Granted the guys are running large assemblies with a lot of parts. However, they seem to run better on their unsupported PC's than on these beefed up HP's. What could be wrong? Any direction or guidance will be appreciated.
