Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Volumetric test data.

Status
Not open for further replies.
psantunes

psantunes

Materials
Joined
Feb 18, 2004
Messages
15
Location
PT
Hello!

I need to adjust a new material (rubberlike) for a abaqus analysis. I already have the compressive data, but now I want to introduce the data for a volumetric test (compression test) in order to calculate the "D" factor. I want to know if I have to introduce the values (pressure Vs. Volume ratio) in a negative form like I need to do in the compressive data (Stress Vs strain).

Thanks


 
Status
Not open for further replies.

Similar threads

AlanSYH_
  • Locked
  • Question Question
Mesh Convergence Test
Replies
6
Views
964
AlanSYH_
AlanSYH_
abc123ali
  • Locked
  • Question Question
Difference in cohesive zone model results peak force for the same input data
Replies
5
Views
3K
FEA way
FEA way
SpaceEngineer4
  • Locked
  • Question Question
benchmark test
Replies
1
Views
282
FEA way
FEA way
abc123ali
  • Locked
  • Question Question
Different results in cohesive zone modeling for the same data input
Replies
8
Views
3K
FEA way
FEA way
R
  • Question Question
Cohesive Zone Modeling of FRP Pull-Out Test in Grooved Concrete – Best Approach for Adhesive Layer in Abaqus?"
Replies
4
Views
4K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top