Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pipleline valve wall thickness design standards 1

Status
Not open for further replies.
aggieengineerrmb

aggieengineerrmb

Mechanical
Joined
May 27, 2003
Messages
28
Location
US
Which industry standard code or codes are most commonly referenced for conformance in the construction of natural gas pipelines? Specifically, wall thickness (at the butt-weld end) of components such as valves must be determined considering design pressure, materials (allowable stresses) and design criteria or formula. What specification provides this information?
 
Sort by date Sort by votes
ASME B31.8 is the Piping Code for Gas Transmision and Distribution. Chapter 3 covers system components, flanges, valves etc.
 
Upvote 0 Downvote
how to calculate dish end thickness
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar
trentar
  • Question Question
numerical example of valve design calculations acc to iso en 15761
Replies
0
Views
6K
trentar
trentar
A
  • Question Question
Use of Gate Valve for Throttling
Replies
9
Views
4K
ASA2025
A
35jacob35
  • Locked
  • Question Question
Valve Paint Aplication
Replies
3
Views
3K
SJones
SJones
neroverdi41
  • Locked
  • Question Question
Pressure Control Valve vs Flow Control Valve
Replies
11
Views
6K
Taicho567
Taicho567

Part and Inventory Search

Sponsor

Back
Top