Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can't export CGM file
- Thread starter mwilliams
- Start date
UG will not export the drawing views from the drawing application. You would have export the drawing sheet as a DWG file and then import it into a modeling view, then export that as a CGM. An alternative that I like to use is a software called SnagIt it is easy to use, gives you a quality image that you can add mark-ups to and is cheap. You can try it for free as well. You can find it at
I know this reply is a bit late but I hope it helps.
I know this reply is a bit late but I hope it helps.
- Thread starter
- #3
I am using NX, and have had no problems exporting CGMs from the drawing application. The area I have had problems is getting the CGM to display properly. This was solved by loading different CGM viewers until we found one that worked to our satisfaction. Unfortunately I don't remember the source we used for the viewer.
- Status
Similar threads
- Locked
- Question
