Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

concrete water tank

Status
Not open for further replies.

ask12

Civil/Environmental
Joined
Jan 21, 2009
Messages
1
Location
GB
Hello,
I am an environmental engineer(chemical eng. based)and have some structural questions:
1. Are there some rule of thumb for determining thickness of concrete wall and weight of bar in it , in a water (or waste water)storage tank?
2.What is the "break point" capacity for building wate tank in steel or concrete ?

Thanks
 
There are rules of thumb for sizing the thickness of concrete walls but it is dependant on depth of fluid retained. You need to let us know the depth of tank. Is it below or above ground and will it have a structural roof?

The rebar quantity will be in the region of 120 to 140kg per cubic metre of concrete cast in the walls.

Regards Andy Machon


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top