Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
boiler
- Thread starter Siddz
- Start date
Yes; mechanical engineers can typically answer these questions.
If you wish to make a start on learning of this yourself, I would recommend beginning with some internet searches.
Also, there are many, many posts in this forum that contain discussions and formulae on this; take the time to read them.
CR
"As iron sharpens iron, so one person sharpens another." [Proverbs 27:17, NIV]
If you wish to make a start on learning of this yourself, I would recommend beginning with some internet searches.
Also, there are many, many posts in this forum that contain discussions and formulae on this; take the time to read them.
CR
"As iron sharpens iron, so one person sharpens another." [Proverbs 27:17, NIV]
EdStainless
Materials
shvet is right on, the best reference is Steam.
I own six different editions of it.
An invaluable resource.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
I own six different editions of it.
An invaluable resource.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question