Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

(Linear) Contact Force, but No Contact Pressure

Status
Not open for further replies.

NASAJPL

Mechanical
Joined
Nov 9, 2023
Messages
5
Location
US
Hey Y'all,,,

Linear Contacts... FEMAP / NX Nastran...

I got a Results to Data Table of

 225..Contact Pressure
 230..Total Contact Force

and when sorted for first 'Contact Pressure' and then 'Total Contact Force' I get this business, shown in the picture.

What's with the gap (blank) in the response of contact pressure for a certain grids, when there appears to exist some semblance of contact force on that thang.
Where's the disconnect?

Pre-thanks for entertaining this question. Have a neat day.

force_but_no_pressure_uw2nsw.png
 
What software are you using ?
 
Dear NASAJPL,
Without the FEMAP model in hand is difficult to know the reason of the strange results, try to post your model, or create a simply pilot study, this way we can investigate, thanks!.
Best regards,
Blas.

~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director

IBERISA
48004 BILBAO (SPAIN)
WEB: Blog de FEMAP & NX Nastran:
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top