Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Deletion of 1.4532 from En 10088-2

Status
Not open for further replies.

ipi

Petroleum
Joined
Nov 24, 2004
Messages
26
Location
QA
Hello there,

The Material 1.4532 has been deleted from En 10088-2(It was there in 1995 edition). Can any one help me , which code it is included in? I need to verify the mechanical properties but all i find is only from google but not from any En Code.

Thanks

 
Would the properties from the old standard suffice? What properties are you looking for?

/PB
 
Thanks for the reply.

Iam looking for mechanical properties. As per the 1995 edition it was 1100 MPA and 20% elongation. But since it was deleted from 1999 edition onwards, i would like to know where this material has been included. I searched and found ISO 15510 but it has only chemical properties.

To summarize, I would like to know which EN/DIN code has 1.4532 still in it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top