Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Material Selection . 1

Status
Not open for further replies.
Joined
Aug 30, 2012
Messages
205
Location
MY
How and where can I get these information ?


3) MATERIAL SELECTION

 Understanding of various types of materials to be used for different services (Wet CO2 service, sour

service, low‐temperature service, toxic service, etc) and knowledge of material available in the market

for the particular service and equipment, and review of Vendor proposes material.

 Understanding of materials grades to be used based on process’s input / material selection report /

corrosion study, and provide feedback if necessary, in‐case of the material selected are in questions.
 
The original (or maybe edited?) link above used by the OP points to a Tutorial presented at the Third Middle East Turbomachinery Symposium back in Feb 2015 entitled "Materials Selection and Development for Centrifugal Compressors Operating in Extreme Sour and Acid Gas Service". The authors are (or at least were, at the time of the symposium) associated with a well-known equipment and systems OEM (who, for obvious reasons, shall remain nameless within this forum). It would appear to me that the OP is looking for how to find the information listed to meet a job posting.

Converting energy to motion for more than half a century
 
API RP 572
NACE MR 0103 & 0175

DHURJATI SEN
Kolkata, India


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top