Guest
Can anyone help with motor relubrication standards/procedures?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
- Thread starter
- #3
Guest
jbartos
I'm trying to set up a motor relubrication schedules for grease lubricated motors based on motor kW rating and Type of service. There is a chart in the CRC Handbook of Lubrication 1991 that I can go by for smaller size motors up to 250 kw but I want to expand it to cover up to 3000 kW. I'm also seeking info on suitable grease base oil viscosities and properties e.g synthetic, EP, etc.
I'm trying to set up a motor relubrication schedules for grease lubricated motors based on motor kW rating and Type of service. There is a chart in the CRC Handbook of Lubrication 1991 that I can go by for smaller size motors up to 250 kw but I want to expand it to cover up to 3000 kW. I'm also seeking info on suitable grease base oil viscosities and properties e.g synthetic, EP, etc.
jbartos
Electrical
- Jan 15, 2000
- 6,440
Please, notice that the electrical engineering covers this under Mechanical Construction, e.g. Reference
Fink D.G., Beaty H.W. "Standard Handbook for Electrical Engineers," 14th Edition, McGraw-Hill, 2000
The grease base oil viscosities and properties will be more on the mechanical/chemical expertise side, in general. It may be worthwhile to post it there too to obtain appropriate information.
Fink D.G., Beaty H.W. "Standard Handbook for Electrical Engineers," 14th Edition, McGraw-Hill, 2000
The grease base oil viscosities and properties will be more on the mechanical/chemical expertise side, in general. It may be worthwhile to post it there too to obtain appropriate information.
- Status
Similar threads
- Locked
- Question