Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ABLESTIK 84-1LMIT

Status
Not open for further replies.
dthom0425

dthom0425

Mechanical
Joined
Dec 6, 2018
Messages
47
Location
US
Hi all,

I've been put into a situation where I may need to use silver epoxy ABLESTIK 84-1LMIT (loctite) rather than tin-lead solder to conductively attach a through hole component into a printed circuit board. There's a long convoluted story here so I won't go through it but in general, I am unable to solder the through hole components in to the board so I'm looking for other conductive attachment methods i.e. the silver epoxy.

Does anyone have any experience with silver epoxy from a conductivity standpoint?

Thanks in advance
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top