Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Catalyst Line

Status
Not open for further replies.
khokho99

khokho99

Industrial
Joined
Apr 1, 2022
Messages
7
Location
SA
Gents,

We are working at 1 HEXENE plant , the catalyst ( chrome with aluminum alkyl ) ,the Catalyst inside the line in pyrophoric (aluminum alkyl ) which is ignite with atmosphere. 0.5" line get plug due to not good flushing with ethyl benzene ( solvent ) we tried with pneumatic pump with 250 KG ethyl benzene , still the line plug.





Any advised will be appreciated.
 
Status
Not open for further replies.

Similar threads

n8cole
  • Locked
  • Question Question
Searching for a "cheat sheet" that list catalyst and their known poisons
Replies
2
Views
1K
n8cole
n8cole
figure8
  • Locked
  • Question Question
Pressure surge following a fast opening of a line size ball valve.
Replies
8
Views
3K
figure8
figure8
Pavan Kumar
  • Locked
  • Question Question
Waste Water Gravity Flow Line Sizing
2
Replies
33
Views
3K
georgeverghese
georgeverghese
Pavan Kumar
  • Locked
  • Question Question
Heat Loss Calculation for LP Steam Line
2
Replies
23
Views
3K
Pavan Kumar
Pavan Kumar
oilman11
  • Locked
  • Question Question
Gas Injection Into Liquid Line
Replies
6
Views
589
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top