ElReyGuiri
Student
I have a question, where do I make the MATRIX and error changes to the static equilibrium solution that was mentioned in this forum? Is that window inside the Adams view o where can I do it? Here is the screenshot of the post:
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Static equilibrium solution error
- Thread starter ElReyGuiri
- Start date
- Status
GregLocock
Automotive
That's a screenshot from ADAMS /Car, not /View.
here's a link to the relevant help on my computer, you will need to correct the path for yours. Search everything will find the bolded file, which is what you need.
file:///C:/Legacy/MSC.Software/Adams_x64/2013_2/help/wwhelp/wwhimpl/js/html/wwhelp.htm#href=adams_view/dialogboxes/sim_set_equilibrium.html
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
here's a link to the relevant help on my computer, you will need to correct the path for yours. Search everything will find the bolded file, which is what you need.
file:///C:/Legacy/MSC.Software/Adams_x64/2013_2/help/wwhelp/wwhimpl/js/html/wwhelp.htm#href=adams_view/dialogboxes/sim_set_equilibrium.html
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
- Status