Leo Marrero
Petroleum
Can I know some reasons why injections wells no longer have vacuum?
Thank you in advance for your help.
Leo Marrero
Thank you in advance for your help.
Leo Marrero
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
SWD Injection wells
- Thread starter Leo Marrero
- Start date
- Status
Not much information there.
Have you recently increased flow rate?
Has the source of, or the water quality changed recently?
Is there more solid content in the source water?
The fluid level may be high,
Reservoir permeability has changed.
Try reducing the injection flow rate.
A black swan to a turkey is a white swan to the butcher ... and to Boeing.
Have you recently increased flow rate?
Has the source of, or the water quality changed recently?
Is there more solid content in the source water?
The fluid level may be high,
Reservoir permeability has changed.
Try reducing the injection flow rate.
A black swan to a turkey is a white swan to the butcher ... and to Boeing.
LittleInch
Petroleum
Maybe the reservoir pressure has increased after all that injection of water?
Or you've clogged up the pores by injecting dirty water like Mr 44 says.
Who knows? We don't.
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Or you've clogged up the pores by injecting dirty water like Mr 44 says.
Who knows? We don't.
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
- Locked
- Question