Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

miniature crosshead extrusion

Status
Not open for further replies.

Gerard-E

Mechanical
Joined
Mar 2, 2021
Messages
9
Location
CA
Hi all,

For months now, I have been trying to find a supplier to make a fairly simple but small plastic profile with a copper insert.

Most extruders don't seem equipped or willing to work on a part this size. We are talking about a 1/4in wide, by 0.055in thick plastic profile, with a copper band that is 0.110in X 0.030in thick inside (one of the faces of the copper remaining visible.

copper_cp2dmw.png


Does anyone know of plastic extruders (somewhere in the world, could be Europe, Asia on North America) that specializes in very small complex parts?

If so, please let me know!
Thanks

Gerry
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top