Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus Contact Force

Status
Not open for further replies.
Akshay9762

Akshay9762

Student
Joined
Apr 22, 2021
Messages
2
Location
DE
Dear,
I am simulating a gear pair ( rack and pinion). I want to extract the contact force i.e Radial, axial and tangential component of the gear force. Which output requests I should give to get these three component. Should I request History Output at the Interaction ( Rack and Pinion ). I am new to Abaqus. Any lead will be helpful.

Thanks in advance.

 
Status
Not open for further replies.

Similar threads

FEA_User
  • Locked
  • Question Question
Interference Contact with Abaqus explicit
Replies
3
Views
4K
FEA way
FEA way
otaviobarodrigues
  • Locked
  • Question Question
ABAQUS pipe-in-pipe contact with friction
Replies
0
Views
3K
otaviobarodrigues
otaviobarodrigues
shubbad
  • Question Question
Abaqus modelling
Replies
1
Views
2K
dtimberlake
D
GaoH
  • Locked
  • Question Question
Abaqus contact bonding
Replies
3
Views
1K
FEA way
FEA way
lLouie
  • Locked
  • Question Question
Bushing Contact
Replies
2
Views
3K
GregLocock
GregLocock

Part and Inventory Search

Sponsor

Back
Top