Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hello everyone, I wanted to know h

Status
Not open for further replies.
SERS.09

SERS.09

Mechanical
Joined
Jul 23, 2020
Messages
10
Location
TN
Hello everyone,
I wanted to know how I can plot the forming limit diagram using a numerical simulation ?
Are there subroutines to plot the forming limit diagram ?

Thanks for your help!


Soufiene OUERFELLI
Ph.D. Mechanical Engineer
 
Sort by date Sort by votes
Which software do you use ? There’s a scientific article that can be useful for you: "Determination of forming limit curve by finite element method simulations" D. Lumelskyj et al.
 
Upvote 0 Downvote
Thank you of your reply
I use the ABAQUS software

Sofyen OR
Ph.D. Mechanical Engineer
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
3
Views
1K
SWComposites
SWComposites
Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
F
  • Locked
  • Question Question
How to Integrating the shear stress of the cross sectional area to find the moment M?
Replies
9
Views
6K
ThomasH
ThomasH
vanji1
  • Locked
  • Question Question
If I want to construct myself a geometric stiffness matrix induced by a pre constraint with finite element modeling
Replies
0
Views
1K
vanji1
vanji1
D
  • Locked
How to take pickup support
Replies
0
Views
3K
deepak1313
D

Part and Inventory Search

Sponsor

Back
Top