×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Query regarding Phreatic level in Plaxis

Query regarding Phreatic level in Plaxis

Query regarding Phreatic level in Plaxis

(OP)
Basically, I have modelled a dyke section for normal water level conditions(the phreatic line just being beneath the ground level) and I aim to model this dyke section for raising water level conditions(like raising 1m in each stage) so as to understand the stability under higher river levels during floods, so want to know how should I be modelling the various stages of raising water levels in Plaxis.

RE: Query regarding Phreatic level in Plaxis

You could do this under any slope stability programme like SlopeW

RE: Query regarding Phreatic level in Plaxis

(OP)
Yeah, But I want to this in Plaxis and want to know how should I proceed?

RE: Query regarding Phreatic level in Plaxis

From what I gather you want to raise the level of water on the river side and figure out the water level on the downstream side of the dyke. If so this is done by a seepage analysis, you can either use software such as geostudio's seep/w or you can do this with hand calcs. Recommend reviewing principles of geotechnical engineering by Das for seepage through an embankment.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members! Already a Member? Login


Resources

Low-Volume Rapid Injection Molding With 3D Printed Molds
Learn methods and guidelines for using stereolithography (SLA) 3D printed molds in the injection molding process to lower costs and lead time. Discover how this hybrid manufacturing process enables on-demand mold fabrication to quickly produce small batches of thermoplastic parts. Download Now
Design for Additive Manufacturing (DfAM)
Examine how the principles of DfAM upend many of the long-standing rules around manufacturability - allowing engineers and designers to place a part’s function at the center of their design considerations. Download Now
Taking Control of Engineering Documents
This ebook covers tips for creating and managing workflows, security best practices and protection of intellectual property, Cloud vs. on-premise software solutions, CAD file management, compliance, and more. Download Now

Close Box

Join Eng-Tips® Today!

Join your peers on the Internet's largest technical engineering professional community.
It's easy to join and it's free.

Here's Why Members Love Eng-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close