Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nitrogen Truck P and T? 1
- Thread starter KernOily
- Start date
EdStainless
Materials
Look at people who make trailers
There are high pressure ones out there, but typically 32-36psi is what you see.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
There are high pressure ones out there, but typically 32-36psi is what you see.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
-
1
- #3
I don't have a phase diagram, but you can look up a variety of properties in USCS units here:
- Thread starter
- #4
bestwork1989
Chemical
hi
you are talking about Nitrogen Truck P and T. I think you have to search on google for more of it.
you are talking about Nitrogen Truck P and T. I think you have to search on google for more of it.
- Status
Similar threads
