Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

dependent parameters

Status
Not open for further replies.
aliex

aliex

Materials
Joined
Jan 27, 2018
Messages
25
Location
DE
I have three geometric parameters.

a, b and c.

i want to know where and how can i make parameter b dependent on c?

for example that c must always be greater than b, if b[5...10] und c[4...20]

a matrix was created by DesignXmodler.

but errors were shown.
is there an IF statement that can be used there?

can I program this somewhere in ANSYS? through APDL or Python?

thanks a lot
 
Status
Not open for further replies.

Similar threads

X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
raz221
  • Locked
  • Question Question
ANSYS Workbench defining temperature dependent yield strength?
Replies
1
Views
605
rickfischer51
rickfischer51
andradesilva
  • Locked
  • Question Question
How to simulate diferent CAD geometries with same settings/parameters in ANSYS Fluent
Replies
1
Views
386
aliex
aliex
asder
  • Locked
  • Question Question
How to define main parameters of base-isolation (Qy, Ke, Kp), (such as with Link element) in ANSYS A
Replies
0
Views
133
asder
asder
MaryamJinsol
  • Locked
  • Question Question
Importing parameters from Catia V5 to ANSYS WorkBench
Replies
0
Views
223
MaryamJinsol
MaryamJinsol

Part and Inventory Search

Sponsor

Back
Top