Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NACE vs. GP240GH+QT

Status
Not open for further replies.

adula29

Mechanical
Joined
Jul 10, 2009
Messages
53
Location
PL
Can we use GP240GH+QT as Killed carbon steel?
This is selection for pump casing for petroleum industry.
 
I don't know, what does the material standard or norm say about it?

"Everyone is entitled to their own opinions, but they are not entitled to their own facts."
 
GP240GH+QT is EN-10213-2

Chemical composition % of steel GP240GH (1.0619): EN 10213-2007
C Si Mn Ni P S Cr Mo V Cu
0.18 - 0.23 max 0.6 0.5 - 1.2 max 0.4 max 0.03 max 0.02 max 0.3 max 0.12 max 0.03 max 0.3
 
Steve and the rest,
There's been a rash of questions posted to incorrect forums recently.
I encourage users to manage their personal forum lists.
IM


"Everyone is entitled to their own opinions, but they are not entitled to their own facts."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top