Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

problem with tool change CATIA V5 R9

Status
Not open for further replies.

kumul

Mechanical
Joined
Feb 20, 2003
Messages
2
Location
CZ
After rotation with table (0 to 180 deg.), next tool incoming from bad side (0 deg.)and crash with workpiece. How to eliminate it, when I use 3axis machine with rotary table.

excuse my english
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top