Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Initial Inspection
- Thread starter MKA4281
- Start date
Dhurjati Sen
Materials
Dear mka4281,
Check with the EPC contractor / licensor. There is a warranty inspection after 6 months / 1 year of commissioning.
Anyway, the first inspection is very important as it would provide the baseline corrosion data for all static equipment.
Regards.
DHURJATI SEN
Kolkata, India
Check with the EPC contractor / licensor. There is a warranty inspection after 6 months / 1 year of commissioning.
Anyway, the first inspection is very important as it would provide the baseline corrosion data for all static equipment.
Regards.
DHURJATI SEN
Kolkata, India
Steve Jones
Corrosion Management Consultant
All answers are personal opinions only and are in no way connected with any employer.
- Thread starter
- #5
If you build a new refinery or new unit or even put a new equipment in your unit, you need to set a plan for your first inspection of this refinery/unit/equipment. After how many months/years in-service you have to inspect it. This is very important to reveal any deficiencies in the design , manufacturing , installation ….etc.
- Status
Similar threads
- Locked
- Solved
- Locked
- Question