Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vacuum limited by actual rafter spacing

Status
Not open for further replies.

TheEverest

Mechanical
Joined
Aug 28, 2019
Messages
72
Location
NP
Dear all,
Can anyone please tell me why we calculate "Vacuum limited by actual rafter spacing" for the rafter design of supported conical roof?
 
The thickness of the roof plate is related to the rafter spacing and the external loads. The formula is in clause 5.10.4.4, and the associated loading conditions are found in clause 5.2.2.e. Your program seems to be solving for the allowable Pe based on your specified b and t values, and then outputting a warning when it's less than your specified Pe.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top