We had a NOBO witness the PQR's for a few WPS's in order to approve them for CAT II-IV work. They now inform me that their NOBO services are located in the UK and will be affected by brexit. Is there anything in the guidelines or PED technical notes that would suggest that these WPS's are no longer valid for PED work?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
PED WPS Approval
- Thread starter ENG2194
- Start date
There’s a link at the bottom of this page, maybe it can help? It’s specifically for the brexit related to industrial products under various directives.
It’s the best I know of that comes close to your question
It’s the best I know of that comes close to your question
As I understand it any UK NOBO whose Accreditation is from UKAS will no longer be an an Acceptable European Notified Body the day Brexit goes into effect. There may be Transition Agreements to handle this situation. Best to check with those NOBO's in the UK.
MGZmechanical
Mechanical
I think certifications prior to Brexit will be valid; but all the new ones must be performed with a NOBO in the EU. I think Lloyd's, for instancem is moving some offices to Netherlands to continue as a NOBO in the EU.
Regards,
Regards,
- Status