Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Max Weld Size for HSS Wall thickness CISC

Status
Not open for further replies.
Veer007

Veer007

Civil/Environmental
Joined
Sep 7, 2016
Messages
379
Location
IN
i have to weld 3/8" size of fillet weld to (HSS6X6X1/4) 1/4" wall thicknes of HSS, as far as i know the weld size must not exceed (D-1/16") where D is wall thickness, But there is a table (3-46,90° fillet size to develop wall strength) shown in CISC handbook says larger weld size, Anyone have encounterd this type of case? advise


HSS_WELD_sbbeqo.png


Thanks in advance!!
 
Status
Not open for further replies.

Similar threads

Miguel D
  • Locked
  • Question Question
Understanding weld callout
Replies
1
Views
1K
gtaw
gtaw
W1987
  • Locked
  • Question Question
Question about weld fillet reinforcement in PJP or CJP joints
Replies
2
Views
3K
SJones
SJones
ThaiVu
  • Locked
  • Question Question
AWS D1.1 - FILLET WELD BREAK TEST
Replies
7
Views
3K
ThaiVu
ThaiVu
iyMY
  • Locked
  • Question Question
AWS D1.1 Fillet Weld WPS Qualified Thickness
Replies
1
Views
2K
gtaw
gtaw
Althalus
  • Locked
  • Question Question
Moment transfer through weld.
Replies
1
Views
946
dauwerda
dauwerda

Part and Inventory Search

Sponsor

Back
Top