BOM Balloons
BOM Balloons
(OP)
thread554-428069: BOM Balloons & Simplified Reps.
Please refer my earlier thread.(one suggestion to my problem is to convert bom balloon to symbols)
By converting bom balloons to symbols & independent of repeat region, how I will make sure that every time I update my assembly BOM correct bom item number is tied to bom balloon.is there any way to figure this out?
or any other suggestions to my problem-
Is there a way we can save parametric BOM balloons from getting deleted, While switching reps.
For Eg-
Case 1 -If in drawing “X” I have Simplified rep “Drawing_sheet1” called out on sheet 1. I want to create a new sheet i.e. sheet 2 in drawing “X” which is quite similar to sheet 1 with minor BOM components change & for sheet 2 I will create a new simplified rep “Drawing_sheet2” in CAD, by doing save a copy of Simplified rep “Drawing_sheet1” , again which is similar to sheet 1 rep but with minor BOM components change. In print I will do save a copy of sheet 1,which will save a lot of time of course. Now in sheet 2 I have to change the Simplified rep to be called out as “Drawing_sheet2” while changing rep CREO deletes all the BOM balloons.
Is there a way out to save the BOM balloons while changing the reps.
Case 2 -If in drawing “X” I have Simplified rep “Drawing_sheet1” called out on sheet 1. I want to create a new sheet i.e. sheet 2 in drawing “X” which is similar to sheet 1 with no BOM components change & for sheet 2 I will create a new simplified rep “Drawing_sheet2” in CAD, by doing save a copy of Simplified rep “Drawing_sheet1” , again which is similar to sheet 1 rep with no BOM components change. In print I will do save a copy of sheet 1,which will save a lot of time of course. Now in sheet 2 I have to change the Simplified rep to be called out as “Drawing_sheet2” while changing rep CREO deletes all the BOM balloons.
Please refer my earlier thread.(one suggestion to my problem is to convert bom balloon to symbols)
By converting bom balloons to symbols & independent of repeat region, how I will make sure that every time I update my assembly BOM correct bom item number is tied to bom balloon.is there any way to figure this out?
or any other suggestions to my problem-
Is there a way we can save parametric BOM balloons from getting deleted, While switching reps.
For Eg-
Case 1 -If in drawing “X” I have Simplified rep “Drawing_sheet1” called out on sheet 1. I want to create a new sheet i.e. sheet 2 in drawing “X” which is quite similar to sheet 1 with minor BOM components change & for sheet 2 I will create a new simplified rep “Drawing_sheet2” in CAD, by doing save a copy of Simplified rep “Drawing_sheet1” , again which is similar to sheet 1 rep but with minor BOM components change. In print I will do save a copy of sheet 1,which will save a lot of time of course. Now in sheet 2 I have to change the Simplified rep to be called out as “Drawing_sheet2” while changing rep CREO deletes all the BOM balloons.
Is there a way out to save the BOM balloons while changing the reps.
Case 2 -If in drawing “X” I have Simplified rep “Drawing_sheet1” called out on sheet 1. I want to create a new sheet i.e. sheet 2 in drawing “X” which is similar to sheet 1 with no BOM components change & for sheet 2 I will create a new simplified rep “Drawing_sheet2” in CAD, by doing save a copy of Simplified rep “Drawing_sheet1” , again which is similar to sheet 1 rep with no BOM components change. In print I will do save a copy of sheet 1,which will save a lot of time of course. Now in sheet 2 I have to change the Simplified rep to be called out as “Drawing_sheet2” while changing rep CREO deletes all the BOM balloons.
Talk To Other Members