Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Standards for inspecting safety restriction orifices?

Status
Not open for further replies.

Saturn V

Mechanical
Joined
May 15, 2018
Messages
1
Location
US
Greetings ENG-TIPS ... first post for me.

I've been looking for an API or other industry standard that provides some guidance on methods and frequency of inspection for safety restriction orifices (ROs). These ROs would be installed to prevent overloading flare headers or downstream PRVs due to an upstream disturbance. I've not been able to find any supporting text in API 510, 570, RP 14C, etc. My colleagues and I have developed a draft inspection strategy for use in our oil and gas facilities, but I'd like to see if there is an industry standard that we can also review and consider. Any other comments about inspection strategies are welcomed.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top