davidinindy
Industrial
- Jun 9, 2004
- 695
Our normal suppliers don't sell them, and I've Googled myself to death with no success.
I have a roller conveyor cart that is fork truck loaded, and pushed off onto a conveyor by hand.
We normally would use 3-1/2" .300 wall rollers for this applications, but they aren't meeting ergo requirements.
Capacity is 4000lbs.
Any thoughts?
Thanks,
David
Connect with me on LinkedIn. Quote: "If it ain't broke, I must not've fixed it good enough"
I have a roller conveyor cart that is fork truck loaded, and pushed off onto a conveyor by hand.
We normally would use 3-1/2" .300 wall rollers for this applications, but they aren't meeting ergo requirements.
Capacity is 4000lbs.
Any thoughts?
Thanks,
David
Connect with me on LinkedIn. Quote: "If it ain't broke, I must not've fixed it good enough"
