BEMPE16524
Mechanical
Hi I would like to know if this type of fitting can prevent hydraulic leakage.
Sorry i don't have the standard.
R.Efendy
Sorry i don't have the standard.
R.Efendy
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
DIN908 Plug
- Thread starter BEMPE16524
- Start date
- Status
- Thread starter
- #3
BEMPE16524
Mechanical
I notice there are 2 type of sealing washers i.e aluminum and copper.
If my port material is aluminum, can i use aluminum washer too?
R.Efendy
If my port material is aluminum, can i use aluminum washer too?
R.Efendy
- Thread starter
- #5
BEMPE16524
Mechanical
thanks for your reply. Appreciate that.
R.Efendy
R.Efendy
JezFullham
Materials
If the company doesn't have it in stock you can alternatively use a DIN910.
This isnt the standard British thread Withworth Pipe Thread DIN/ISO 228, it is the 288 G thread.
Therefore to really seal, you need to use an o-ring, as mentioned above.
This isnt the standard British thread Withworth Pipe Thread DIN/ISO 228, it is the 288 G thread.
Therefore to really seal, you need to use an o-ring, as mentioned above.
- Thread starter
- #7
- Status
Similar threads