Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

@IRStuff. Off Topic, only mildly Mathcad related

Status
Not open for further replies.
PNachtwey

PNachtwey

Electrical
Oct 9, 2004
779
@IRStuff, I am not posting in the Control forum anymore. The control forum moderator deleted the thread you were looking for. The control forum moderator seemed to think the topic wasn't suitable and that the control forum moderator knows better. Strange, I see someone found the link I posted and reposted it. My position now is let the control forum moderator answer the questions. He claims to know it all.

The control forum moderator has also deleted Bi-Volts threads but I put a little work into those threads de-bunking Bi-Volts technique or lack of technique.
I see no point in posting in the control forum if the thread and posts are going to be deleted.

I have lots of YouTube videos where I use Mathcad as my main tool for making the presentation.
If you guys want to see Mathcad being used for control see my 'Peter Ponders PID' YouTube channel. The videos target advanced control topics so knowing differential equations and Laplace transforms, state space and Laplace transforms is a must.

Sorry I only have Mathcad 13 and have no plans to update. I can't help people with their Mathcad prime problems.



Peter Nachtwey
Delta Computer Systems
 
Replies continue below

Recommended for you

Sort by date Sort by votes
I don't know what you are on about but you will probably get a vastly bigger relevant audience on the Mathcad forum than the MATLAB one.

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376
 
Upvote 0 Downvote
Sorry to hear that. Bi-Volt was a very disruptive member, both in the content and manner of posting. I don't know who ratted him out, but I was already ignoring and thread that he participated in.

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
 
Upvote 0 Downvote
Peter,

There is no one forum moderator, or even group of moderators, for any particular forum. This site is moderated by all members through Red Flags, which cause site management to review the flagged post, and possibly the entire thread. I'm guessing that none of your posts were red-flagged, but that some of Bi-Volt's were, especially the later posts. It seemed as though reasonable discussion had devolved into mudslinging by that member in some threads. Your posts were thoughtfully prepared, and I valued them - I'm sure others did as well. As to why whole threads in that forum disappeared, I have no guess. Your expertise will be missed there.

xnuke
"Live and act within the limit of your knowledge and keep expanding it to the limit of your life." Ayn Rand, Atlas Shrugged.
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Upvote 0 Downvote
oops sorry about the wrong forum post. Sometimes neg-tips adds forums to my list and I clicked on matlab instead mathcad obviously.

xnuke said:
I'm guessing that none of your posts were red-flagged, but that some of Bi-Volt's were
Click to expand...
No, my thread about time constants not being constant was deleted and someone make some not nice comment about me. Bi-Volt did not post on my thread about time constants. I have picked up a troll. Someone has also put thumbs down on my YT videos with no explanation.

It's likely that the forum management decided that the poster was too disruptive and not contributing positively to the site and to that specific forum.
Click to expand...
Is that just for one person to decide? It seems so. Bi-Volt posted some things that showed a lack of experience. However, I think there was something to be gained by pointing out where he was wrong and how to do what Bi-Volt was trying to do the correct or better way.

I am gone.



Peter Nachtwey
Delta Computer Systems
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

xMeck
  • Locked
  • Question
MATLAB live script coding help - Phase/Freq offsets
Replies
4
Views
915
GregLocock
GregLocock
RobertFinney
  • Locked
  • Question
Which software to go for, MatLab, Maple, MathCAD, Maxima, Mathematica ??? 1
Replies
7
Views
553
IRstuff
IRstuff
fibonacci1984
  • Locked
  • Question
problem scrambling a picture- only grayscale
Replies
1
Views
192
flash3780
flash3780
nickw1881
  • Locked
  • Question
A transfer function block that has only zeros
Replies
3
Views
204
electricpete
electricpete
bonosa
  • Locked
  • Question
read only edit box
Replies
1
Views
139
bonosa
bonosa

Part and Inventory Search

Sponsor

Back
Top Bottom