I would like to experiment with how different factors influence the driving of a pile, for my own personal curiosity. I do not have access to GRLWEAP. Do any DOTs/Universities have a free version of comparable software? Or is this a completely proprietary analysis tool?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
WEAP
- Thread starter appot
- Start date
I didn't try it but There is demo version here:
Our company purchased the software some years ago and it was not too expensive, if you are really interested on it, you would want to buy it.
Our company purchased the software some years ago and it was not too expensive, if you are really interested on it, you would want to buy it.
There's a free DOS WEAP program called WEAP87 that was developed for FHWA floating around. It's an old DOS program so it's not user friendly and you will have to run a DOS emulation program to run it. It has a full manual written for it in great detail.
It was written in the 70's so it was originally meant for punch card input. So there is an input program and a program to run the analysis. I have been able to successfully run it and get results comparable to a CAPWAP analysis done on a PDA.
It was written in the 70's so it was originally meant for punch card input. So there is an input program and a program to run the analysis. I have been able to successfully run it and get results comparable to a CAPWAP analysis done on a PDA.
- Thread starter
- #4
- Status