Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Beam on" hours

Status
Not open for further replies.
sparky4808

sparky4808

Agricultural
Joined
Apr 27, 2015
Messages
34
Location
US
For Amada lasers, does anyone know what parameter or where to look to find the "beam on" hours? I have checked P# 6750(power on time) & 6754(cutting time) but neither one of those seem to be accurate. I know they are in minutes but I converted to hours and one machine seems like it could be correct, but the other is way off from the analog hour meter installed from the factory.

 
Sort by date Sort by votes
ur beam on time is ur actual cutting time it doesn't count traverse or moving time just when ur beam is on and cutting so you can run ur laser for 20 hours and beam on time only be 18 jus an example [afro]
 
Upvote 0 Downvote
I understand that. It just seems weird that out of 30,847 resonator hours(analog hr meter), my beam on time is only 9,031 Hrs. Power on time is showing 17,694Hrs.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Garrett Green
  • Locked
  • Question Question
Mazak Laser having trouble cutting 1/2" Material
Replies
0
Views
1K
Garrett Green
Garrett Green
RPosty
  • Question Question
How to choose correct Beam Splitter for 50/50 output with sealed beam co2 laser? S vs P pole
Replies
3
Views
7K
Bluces
B
enginesrus
  • Question Question
What is the latest on high power?
Replies
0
Views
7K
enginesrus
enginesrus
D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
Angus1
  • Locked
  • Question Question
Bystar 3015 - Stuck on "Vacuum Pump Running" during Startup
Replies
3
Views
286
Angus1
Angus1

Part and Inventory Search

Sponsor

Back
Top