Jan 14, 2003 #1 BillKozak Chemical Joined Jan 14, 2003 Messages 1 Location US What is the OD of a 3000# 1/2" pipe, half coupling, for welding to a vessel. I used to have this sort of information at my fingertips before my office underwent creative compression. Bill Kozak
What is the OD of a 3000# 1/2" pipe, half coupling, for welding to a vessel. I used to have this sort of information at my fingertips before my office underwent creative compression. Bill Kozak
Jan 14, 2003 #2 mgp Mechanical Joined May 30, 2001 Messages 224 Location DK Try http://www.bonneyforge.com/specs/fittings/socket_halfcouple.cfm This should contain what you need (and more of the same kind at the main page if required) regards Mogens Upvote 0 Downvote
Try http://www.bonneyforge.com/specs/fittings/socket_halfcouple.cfm This should contain what you need (and more of the same kind at the main page if required) regards Mogens
Jan 14, 2003 #3 LSThill Mechanical Joined Oct 10, 2002 Messages 1,120 Location US Hi BillKozak (Chemical) RE: Pressue Vessel Handbook, Eugene F Megyesy What is the OD of a 3000# 1/2" pipe Page 368 Length "A" 15/16" Diameter "B" 1-1/8" Leonard@thill.biz Upvote 0 Downvote
Hi BillKozak (Chemical) RE: Pressue Vessel Handbook, Eugene F Megyesy What is the OD of a 3000# 1/2" pipe Page 368 Length "A" 15/16" Diameter "B" 1-1/8" Leonard@thill.biz
Jan 14, 2003 #4 LSThill Mechanical Joined Oct 10, 2002 Messages 1,120 Location US Hi BillKozak (Chemical) I agree with mgp (Mechanical), I am wrong use http://www.bonneyforge.com/specs/fittings/socket_halfcouple.cfm Leonard@thill.biz Upvote 0 Downvote
Hi BillKozak (Chemical) I agree with mgp (Mechanical), I am wrong use http://www.bonneyforge.com/specs/fittings/socket_halfcouple.cfm Leonard@thill.biz