Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

does water lose from HEC-RAS 5.0x 2D flow area?

Status
Not open for further replies.
pinkpig

pinkpig

Civil/Environmental
Joined
Feb 15, 2013
Messages
64
Location
US
In HEC-RAS 2D modeling,will water get lost from 2D flow areas? or water will build up against an imaginary wall at 2D area boundaries (similar behavior happen at HEC-RAS 1D cross section limits)?
 
Status
Not open for further replies.

Similar threads

DrainageEnthusiast
  • Locked
  • Question Question
HEC-RAS Flow Regime
Replies
4
Views
8K
DrainageEnthusiast
DrainageEnthusiast
PT60056
  • Locked
  • Question Question
Hec-Ras- Cliping a large HEC-RAS model to a small specific area
Replies
3
Views
7K
Ekenny_G
Ekenny_G
PT60056
  • Locked
  • Question Question
HEC-RAS- culvert modeling- huge jump upstream of culvert
Replies
7
Views
5K
TerryScan
T
C
  • Question Question
Orifice Flow- Falling Head with Non-Constant Reservoir Area
Replies
2
Views
10K
coloeng
coloeng
B
  • Locked
  • Question Question
1D Sediment transport modeling HEC-RAS - Constant errors
Replies
0
Views
7K
bobo67
B

Part and Inventory Search

Sponsor

Back
Top