Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IBC Seismic Values for Mexico

Status
Not open for further replies.

jsschmidt

Mechanical
Joined
Aug 18, 2016
Messages
1
Location
US
I am trying to find IBC seismic values for a project in Mexico but cannot find any. I am looking for the Ss and S1 values.

Thanks,
Josh
 
Should you not be using the Mexican building code?

I like to debate structural engineering theory -- a lot. If I challenge you on something, know that I'm doing so because I respect your opinion enough to either change it or adopt it.
 
I found this some years ago. I cannot vouch for it. It looks like a US government agency that made this and it is old. Maybe this will give you a lead to find a more updated document. Good luck.
 
 http://files.engineering.com/getfile.aspx?folder=acac3334-7373-4d97-84db-a1d00c99df25&file=Seismic_coefficients_international.pdf
The document that @weab linked to is a UFC design guide, produced by USACE. It is a guide for military design usage around the world. There is a much newer version of this document, and it can be downloaded freely from the USACE website. However, you will notice that there are no values shown for Mexico proper, since the US Armed Forces have no bases located in Mexico.
Dave

Thaidavid
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top