×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Brick veneer attachment IBC
2

Brick veneer attachment IBC

Brick veneer attachment IBC

(OP)
I am familiar with brick veneer attachment requirements per IRC (residential). What section on the IBC (commercial) lists connection requirements for brick veneer attached to wood framing?

RE: Brick veneer attachment IBC

Are you looking for a prescriptive spacing or just the general requirements? I domt know off the top of my head if anything is explicitly stated in the masonry chapter. But I'd start there and I'd also check with ACI 530. They have an entire chapter on veneer. Someone else may know if it's hidden in one of the arch dominant chapters.

RE: Brick veneer attachment IBC

(OP)
@mike: I am specifically after spacing of ties requirement. Thank you.

RE: Brick veneer attachment IBC

Section 1405.6 refers you to ACI 530. Corrugated ties are typically acceptable for residential but not commercial. There are cavity gap length restrictions (1" max) and load restrictions in compression.

RE: Brick veneer attachment IBC

Yes - IBC refers out to ACI 530 - there is an "Anchored Veneer" chapter there that specifies tie spacing.

Check out Eng-Tips Forum's Policies here:
FAQ731-376: Eng-Tips.com Forum Policies

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources


Close Box

Join Eng-Tips® Today!

Join your peers on the Internet's largest technical engineering professional community.
It's easy to join and it's free.

Here's Why Members Love Eng-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close