CREO 3.0 (weight Error)
CREO 3.0 (weight Error)
(OP)
Hi,
Im rajesh. Im working in CREO 3.0 version. while in modelling and detailing. some times, I found error an weight. (Analysis\Mass Properties) I will get actual weight after assigning the material. but in drawing we use relation for weight (WEIGHT = PRO_MP_MASS). But it shows wrong valve, in parameter table also I check with weight as pro_mp_mass. but there also showing same error value, how can I solve this error.
Im rajesh. Im working in CREO 3.0 version. while in modelling and detailing. some times, I found error an weight. (Analysis\Mass Properties) I will get actual weight after assigning the material. but in drawing we use relation for weight (WEIGHT = PRO_MP_MASS). But it shows wrong valve, in parameter table also I check with weight as pro_mp_mass. but there also showing same error value, how can I solve this error.
RE: CREO 3.0 (weight Error)
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
RE: CREO 3.0 (weight Error)
how to create exploded view tracking line in creo 3.0, can anybody help me, to create tracking line or offset line in creo 3.0