Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Right click customisation

Status
Not open for further replies.

Nomiswerdna

Structural
Joined
Jul 13, 2015
Messages
20
Location
GB
Hi All,

When I right click and press C, it starts the CLIPBOARDCOPY command.

What determines this?

I would like to execute other commands on my right click menu the same way. ie 'right-click+3 would start another command named with a 3 at the front of it's name.

Thank you.

Simon.[bigglasses]
 
Mine brings up circle. Go to Tools, Customize Interface, Mouse Actions, maybe you can figure it out from there. I have a programmable mouse, so I think mine was set from there. Sylvia
 
Hi Sylvia,

Thank you for your reply.

I can see what you mean, but the features there are somewhat limited.

I have a few commands that I would like to add to my right-click menu, but I find it's quicker to 'right-click'+Key press, rather than 'right-click+left-click'.

But if that's the way it's got to be then I'll make do.[smile]

Regards,

Simon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top