Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ceramics for geotechnical engineering pwp measurements

Status
Not open for further replies.
Dg1

Dg1

Civil/Environmental
Joined
Dec 10, 2002
Messages
1
Location
IE
hello,

does anyone have any information on where to get very thin ceramic discs... approx. 2.5mm thick for use in conjunction with pore pressure transducers to measure pore water pressures in a soil ( i.e. it seperates the effective stresses and pwp)... the ceramic must also have a high air entry walue... approx. 15 bar if possible.


thanks,

dave
 
Status
Not open for further replies.

Similar threads

Otibix
  • Locked
  • Question Question
Shear Strengths of Glass Ceramics
Replies
5
Views
1K
Otibix
Otibix
Radius1
  • Locked
  • Question Question
Looking for specification for identifying pearlite in cast iron sample.
Replies
0
Views
2K
Radius1
Radius1
BSMEclassof2012
  • Question Question
Brine concentration for pumps made from ductile cast
Replies
1
Views
1K
EdStainless
EdStainless
S
  • Locked
  • Question Question
Software for Material Engineers
Replies
4
Views
3K
Saman2002
S
ShabsRBI
  • Locked
  • Question Question
Burst Calculation for Boiler Steam Drum for RBI model
Replies
1
Views
2K
BEMPE16524
BEMPE16524

Part and Inventory Search

Sponsor

Back
Top