Contact Area

willmcg4132 · Jul 22, 2013

Hello,

I am working on a project in ADAMS with multibody dynamics and intermittent contact. I have been using the IMPACT contact model, and the simulation is performing as it should, but for post-processing, I need to know not only the normal forces at each contact, but also the nominal contact area. I've struggled to figure out how to actually do this, so I thought I would reach out and see if anyone could help me out.

Thanks

GregLocock · Jul 24, 2013

Take the force history from ADAMS and apply it to an FEA model. It may be possible to extract the stresses in ADAMS/Durability but I don't know how.

Cheers

Greg Locock

New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?

willmcg4132 · Aug 19, 2013

Hey all,

I figured out how to do it, it turned out to be pretty involved, so a how-to with screen caps of everything is here:

http://www.wandertechnologies.com/p...es-and-calculating-contact-area-in-msc-adams/

http://www.WanderTechnologies.com

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Contact Area

willmcg4132

Mechanical

GregLocock

Automotive

willmcg4132

Mechanical

Similar threads

Part and Inventory Search

Sponsor