Minitab Help
Minitab Help
(OP)
Hello Experts,
I have a large burner in a furnace that burners natural gas as fuel. The combustion air is heated to save on fuel costs. I can measure the following variables in the combustion air supply temperature, pressure, volumetric flow rate scfm. I can also measure the natural gas volumetric flow rate scfm. Heres where I need the help, I want to run minitab test to analyze which variables make the most change on my process. Which test can I run and which graphs can I use to look at my results?
Thanks for any help.
I have a large burner in a furnace that burners natural gas as fuel. The combustion air is heated to save on fuel costs. I can measure the following variables in the combustion air supply temperature, pressure, volumetric flow rate scfm. I can also measure the natural gas volumetric flow rate scfm. Heres where I need the help, I want to run minitab test to analyze which variables make the most change on my process. Which test can I run and which graphs can I use to look at my results?
Thanks for any help.
RE: Minitab Help
You can also run a regression analysis where you again define the inputs and outputs. This usually will assign a p vale to the inputs and the least significant ones usually drop out.
RE: Minitab Help
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376: Eng-Tips.com Forum Policies http://eng-tips.com/market.cfm?