Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Coordinate correction

Status
Not open for further replies.

M2811

Coastal
Joined
Jul 4, 2012
Messages
1
Location
PT
Hello!
During a survey with a total station (Leica TCR 705 auto), it was introduced a wrong coordinate (in the "y") in one of 9 base stations, so part of the survey is in a completly different place. How can I correct these points? I used a backsight,but I dont have the total station with me anymore.
 
If you know the difference between the good position and the bad position and have a couple of points to check into, you can do a coordinate transformation. Or it might be easier to just re shoot your topo using the correct values on your control.

Timothy W.Day
Field Engineer
Brasfield and Gorrie, LLC
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top