Motor Driven Potentiometer
Motor Driven Potentiometer
(OP)
The basic spec. needed is a cross to the Bourns PRM162 series, motor driven ptentiometer. The model is available from Mouser and Digi-Key. However, not in needed ohm values.
The two ohm values needed are 500K and 10K.
RF is the primary control W/user friendly, manual control available. The Bourns PRM162 is a single turn, w/clutch.
Useage is 2K/yr. or more, each value. Budget is not to exceed $15.00 included will be a good metal .25 shaft knob and face-plate.
Perhaps someone knows of a cross or would be interested in discussing collaberation.
The two ohm values needed are 500K and 10K.
RF is the primary control W/user friendly, manual control available. The Bourns PRM162 is a single turn, w/clutch.
Useage is 2K/yr. or more, each value. Budget is not to exceed $15.00 included will be a good metal .25 shaft knob and face-plate.
Perhaps someone knows of a cross or would be interested in discussing collaberation.
Talk To Other Members