Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM A193 GR B16

Status
Not open for further replies.
TI86

TI86

Mechanical
Aug 23, 2002
1
Greetings,

I am trying to find the yield strength of ASTM A193 Grade B16 at 900 deg F. Can anyone tell me where to go to find this information? So far my feable attempts have been unawarding. Your help is greatly appreciated.

Thanks
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Fig. 2.3.1.1.1 in MIL-HDBK-5H shows that low-alloy steels (the classification they use for a Cr-Mo-V type steel) would retain approximately 50 % of their tensile strength at 900 F, for an exposure time of 1/2 hour. You can obtain this document from the following website (warning: HUGE DOWNLOAD):


You can download a smaller version from some other website-- do a search of Eng-Tips for MIL-HDBK-5, as it it has been mentioned frequently.

Other potential sources for this type of information would be books from ASM International (
Atlas of Stress-Strain Curves

Engineering Properties of Steel
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Wickerfields
  • Locked
  • Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
975
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
C
  • Question
ASME B16.11&B16.5
Replies
3
Views
3K
SnTMan
SnTMan
Muhammad Ijaz
  • Locked
  • Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
941
Muhammad Ijaz
Muhammad Ijaz
Rubje
  • Locked
  • Question
ASTM A7, A30, A70
Replies
1
Views
967
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top Bottom