Jul 27, 2010 #1 CR100 New member Joined Sep 1, 2009 Messages 69 Location CA Can anyone point me in the right direction, I am looking for an SAE standard for electrical connector material (plastic) that will be used inside of the automotive transmission.
Can anyone point me in the right direction, I am looking for an SAE standard for electrical connector material (plastic) that will be used inside of the automotive transmission.
Jul 27, 2010 #2 patprimmer New member Joined Nov 1, 2002 Messages 13,816 Location US It will most likely be heat stabilised nylon 6.6. Quite likely DuPont will list what standards certain grades of their Zytel brand meet. That could be a good starting point for a search My knowledge of automotive industry standards is out of date, but as I recall, different companies used different stds. SAE, Mil and FMT(?) spring to mind. Regards Pat See FAQ731-376 for tips on use of eng-tips by professional engineers & http://eng-tips.com/market.cfmfor site rules Upvote 0 Downvote
It will most likely be heat stabilised nylon 6.6. Quite likely DuPont will list what standards certain grades of their Zytel brand meet. That could be a good starting point for a search My knowledge of automotive industry standards is out of date, but as I recall, different companies used different stds. SAE, Mil and FMT(?) spring to mind. Regards Pat See FAQ731-376 for tips on use of eng-tips by professional engineers & http://eng-tips.com/market.cfmfor site rules