Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

1/2" ASTM A333 Gr 6 Material Certificate but no impact test result

Status
Not open for further replies.
abbver98

abbver98

Mechanical
Joined
Jun 21, 2002
Messages
195
Location
BE
Material Certificate for ASTM A333 Gr 6 1/2 doesn't show impact test result. I found it also on ASTM A350 LF2 Cl1 with the same dimensions. When I analyse the ASTM specification no indications to exempt from impact test. Any reasons ?
 
Sort by date Sort by votes
If this is 1/2" OD pipe, wall thickness < 0.120" do not require impact tests. If the thickness is 1/2" the MTR does not comply with 14.1 of A-333 and you should reject the pipe.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
yurachv
  • Question Question
results of tests as per SA-480
Replies
5
Views
9K
EdStainless
EdStainless
gwalkerb
  • Locked
  • Question Question
A420 Gr WPL6 impact test temperature documentation &amp; unit systems
Replies
5
Views
1K
gwalkerb
gwalkerb
Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top