Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ahsoares - stress analist

Status
Not open for further replies.
ahsoares

ahsoares

Industrial
Joined
Apr 25, 2008
Messages
1
Location
BR
How to model a angle valve(manual)in Caesar II (R. 4.4). There no selection mode available for this item.
Ahsoares
 
Sort by date Sort by votes
Build two rigids, back to back, changing direction from one to the other. Proportion the total weight between each as necessary.

Richard Ay
COADE, Inc.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Number of Cycles- Stress Range Reduction Factor
Replies
0
Views
2K
anirudhanp
A
jseag
  • Question Question
When to utilize Caesar's liberal stress allowables?
Replies
3
Views
7K
StressGuy
StressGuy
pylandj1
  • Locked
  • Question Question
CAESAR II Hoop Stress
Replies
1
Views
2K
johnengkol
johnengkol
madl_07
  • Locked
  • Question Question
ASME B31.1 Weld Joint Efficiency, why is Caesar II dividing the weld eff to stress allowable?
Replies
0
Views
969
madl_07
madl_07
S_a_e
  • Locked
  • Question Question
Stress Analysis of thermoplastic piping (PVDF, PP)
Replies
1
Views
1K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top